Control system, through the DLL library files, and control card to communicate.

Control system, mainly for a variety of motion control algorithm calculation (straight line, arc, irregular curve interpolation), G code analysis, small line forward algorithm.

XHC-MKX.DLL：By the control card to provide the DLL, the control system, by calling XHC-MKX.DLL library function, you can download data to the control card. The system initiates data from the control card.

1.Using USB cable and computer communication, USB communication standard: USB2.0
2.The control card supports 6-axis linkage
3.Control card output pulse uniform, the maximum pulse frequency 2MHZ
4.The control card supports 16 input IO ports, all input ports, active low
5.The control card supports eight output ports, the output port open output.
6.The control card supports the inverter interface, supports analog 0-10V output, or 0-5V output.
7.The control card supports PWM output, PWM frequency 2KHZ
8.EMI design, stable and reliable, to avoid the work of the inverter, affecting USB communication instability.
9.Control card support soft limit, hard limit, the origin switch, support the knife signal, emergency stop signal control.
10.The control card provides WINDOWS standard DLL library function, provides API program interface, provides customers to develop 2 times.

---

5、Parameter

 

Parameter	Description
Axis drive control：	Isolated oc output	Voltage:5V,maximum load :20A
	type	STEP/DIR
	Maximum Step frequency	2000KHZ
	Number of support axis	PMK3-V：3 axis  PMK4-V：4 axis PMK6-V：6 axis
Spindle control	Analog output voltage	0-10V
	Digital PWM output	5V,1KHZ,fill factor:0-100%
	STEP/DIR	Minimum frequncy：15Hz Maximum frequncy：4KHz
8 digital output	Maxmimum load of output line	50mA
	Maxmimum voltage on out line	25V
16 digital input	Maxmimum load of input line	5mA
	maximum voltage on input line	25V
PC connection	Standard USB2.0

---

6、Attachments

PMKX-V motion card	1 piece
Use wire	1 piece
PMKX CD	1 piece
Package box size	275*144*42mm
weigtht	0.7KG