CNC Mach3 motion control card MKSX-V
1、Applications
MKSX-V has 2 series:
1. MKS3-V:3 axis motion card.
2. MKS4-V:4 axis motion card.
works with Mach3 CNC system under all windows platform.
2、Application overview
3、Product overview
4、Signal connection
5、Key feature
1. Support power-off resume function.
2.Fully supporting all Mach3 versions
3.Support 1.5 meters USB cable
4.Supports Up 4-axis
5.Maximum step-pulse frequency is 2000KHz
6.Status indicator LED can be useful to show the USB connection, and working status by flashing.
7.8 general-purpose input,4 output
8.all IO-port isolation, interference, stable performance
9.Full support for USB hot-swappable, the card is Monitoring USB connection status at any time.
6、General Characteristics
Parameter | Description | |
Axis drive control:
|
Isolated oc output | Voltage:5V,maximum load :20A |
type | STEP/DIR | |
Maximum Step frequency | 2000KHZ | |
Number of support axis |
MKS3-V:3 axis MKS4-V:4 axis |
|
Spindle control | Analog output voltage | 0-10V |
Digital PWM output | 5V,1KHZ,fill factor:%1-100% | |
STEP/DIR |
Minimum frequncy:15Hz Maximum frequncy:4KHz |
|
4 digital output | Maxmimum load of output line | 50mA |
Maxmimum voltage on out line | 25V | |
8 digital input | Maxmimum load of input line | 5mA |
maximum voltage on input line | 25V | |
communication method | USB 2.0 |
7、Attachments
MKSX-V motion card |
1 piece |
USB cable | 1 piece |
Driver disk | 1 disk |
MACH3 trouble shooting | 1 book |
MACH3 config and driver installation | 1 book |
MKSX –V user Manual | 1 book |
Package box size | |
weigtht |
上一篇:CNC Mach3 motion control card-MKX-IV 下一篇:CNC Mach3 motion control card MKX-ET 上一篇:CNC Mach3 motion control card-MKX-IV 下一篇:CNC Mach3 motion control card MKX-ET Return list